The NorDan security door is 'Secured by Design' approved and can be used as a main, balcony or back door. It is available as single or double (French) doors, both inward and outward opening. All models are fitted with three-point locking systems for added security and weathertightness. Features include:
Introduction of transoms and/or mullions to suit design requirements
Insulated panels are built into the frames
Sturdy security hinges
Laminated or toughened glass fitted as standard
A variety of locking arrangements available
Function
Features
Options
Technical / drawings
For the primary door, first unlock it by using a key. Then lower the handle down and push the door open. To close the door, pull or push the door shut until it ‘catches’. To lock the door, raise the handle fully which engages the locking bolts then lock with the key.
For the secondary door, open the main door as described above. Locate the shoot bolts in the edge of the secondary door at the top and bottom. The shoot bolts have two recesses where the control sits. To open the secondary door, move the shoot bolt control from the locked position to the open position. At the top of the door, the controller moves down. At the bottom of the door, the controller goes up. Make sure the control is pushed fully in the recess to ensure there is no obstruction. The secondary door can now be opened freely.
Wide variety There is a wide variety of design specifications to choose from. Transoms and mullions may be ordered optionally, panels may be aluminium clad externally. The range of glazing options is almost limitless.
Doorsets All doors are manufactured and assembled as complete operational doorsets within exterior frame and pre-hung door leaf. Handles and cylinder sets are supplied loose, all other ironmongery is fitted.
Panelling Dependent on the finish required, NorDan offer a variety of materials for inset panels. Standard panels are in MDF, with the option of aluminium facing on the outside. Pine veneer panels are optional, and used where a stained finish is specified. Insulated panels are 48mm thick with a U-value of 0.7 W/m2K
Optional aluminium cladding Aluminium cladding is optionally available for the NorDan balcony door. Powder coating available from the classic RAL colour range. Aluminium cladding increases the life-span of the door and also greatly reduces maintenance costs.
Optional wind brake device A friction stay is available as an option on inward and outward opening doors. Doors are profiled to enable retrospective fitting.
Please note that because of varying file sizes, download times may vary.
NorDan's new NTech 1.2 range offers the natural beauty and warmth of wood with the optional advantage of aluminium cladding which greatly reduces maintenance. Standard whole product U-values from as low as 1.2 W/m2K.
